Custom acrylic prints, made in Pasadena, Maryland
Your photo or artwork UV printed on clear acrylic: wall prints that hang on metal standoffs, and solid blocks for a desk or shelf. See your price as you choose, then send your picture: we check it and email your order link within 2 business days.
- Wall prints12 × 12 or 12 × 16 in, 1/8 in thick, with a wall‑mount kit
- Acrylic blocks4 × 4 in, 1 in thick
- Flat, see-through or raisedBehind the acrylic, or raised like paint up to 2 mm
- From $55 a wall printWith the kit. Blocks from $29, or 3 for $75
Three ways to print it
Our UV printer lays down resin ink that UV light cures hard. On acrylic, it can print behind the sheet so you see the picture through glossy clear acrylic, leave out the white so light shines through, or build the ink up on top like paint.
Behind, flat
Printed on the back, so the picture sits behind glossy clear acrylic. Best for most photos and artwork.
On top, raised
Ink built up on the front, up to 2 mm, like brush strokes. Best for oil-painting looks. Raised ink sits on white, so it isn't see-through.
Behind, see-through
No white ink, so light shines through the colors like stained glass. For the full stained-glass look, we redraw your picture with dark lead lines: choose Design it for me as stained glass in your request, $15.
What acrylic prints cost
Printed behind, flat or see-through, the price is the piece's. Printed on top and raised, the height adds to it. The request page shows your exact total as you choose.
| Pieces | Each |
|---|---|
| 1 to 4 | $55 |
| 5 to 9 | $49 |
| 10 or more | $44 |
| Pieces | Each |
|---|---|
| 1 to 4 | $65 |
| 5 to 9 | $58 |
| 10 or more | $52 |
| Pieces | Each |
|---|---|
| 1 to 2 | $29 |
| 3 to 9 | $25 |
| 10 to 24 | $23 |
| 25 or more | $20 |
| Raised | 12 × 12 in sheet | 12 × 16 in sheet | 4 × 4 × 1 in block |
|---|---|---|---|
| Texture, 0.5 mm | +$6 | +$8 | +$2 |
| Texture, 1 mm | +$27 | +$35 | +$4 |
| Texture, 2 mm | +$87 | +$112 | +$12 |
| Relief, 0.5 mm | +$2 | +$2 | +$2 |
| Relief, 1 mm | +$8 | +$10 | +$2 |
| Relief, 2 mm | +$38 | +$49 | +$6 |
Orders have a $15 minimum before tax, and Maryland sales tax (6%) is added for pickups and Maryland addresses.
- Your own artworkNo setup feePrinted as you send it, fitted to the sheet or block. You see it in 3D before you send it.
- Design it for me$15Made from your notes and pictures, or redrawn as stained glass. One round of changes is included, then $5 a round. Each more design in the same order is $5, with one change.
- Rush, under a week+30%Your order moves up our queue. We never stop a job that's already printing.
Ready to hang
Every wall print comes pre-drilled, with metal standoffs, wall anchors and screws, a mini screwdriver and a mini level. The standoffs come in silver or black: choose in your request. The sheet floats a little off the wall on them, held by a cap at each corner.
You'll need a pencil, a drill with a 5/16 in bit and a hammer. See how it hangs, step by step in 3D.
Sizes
- 12 × 12 in sheet, 1/8 in, with a wall-mount kit
- 12 × 16 in sheet, 1/8 in, with a wall-mount kit
- 4 × 4 in block, 1 in thick
How ordering works
See your price as you choose the size and how to print it, then send it with your picture. You can place it, add text and see it in 3D.
We check your picture and email your order link within 2 business days. Nothing to pay until then.
Pay by Venmo. We send you the design to check before we print.
Pick it up in Pasadena, MD, or we ship it anywhere in the US.
Acrylic print questions
Anything else, email us at [email protected].
How much does a custom acrylic print cost?
A 12 × 12 in wall print with its kit is $55, a 12 × 16 in one $65, and a 4 × 4 in block $29, less each when you order more. Printed on top and raised, the height adds to it: see the prices. The request page shows your exact total as you choose, and there's nothing to pay until we've checked your picture.
What sizes do you make?
Wall prints are 12 × 12 in or 12 × 16 in, 1/8 in thick, each with a wall-mount kit. Blocks are 4 × 4 in and 1 in thick, for a desk or shelf.
How does it hang on the wall?
On four metal standoffs, silver or black, in the kit with wall anchors, screws, a small screwdriver and a mini level that clips on the sheet's top edge. Mark the wall through the holes, drill with a 5/16 in bit, tap in the anchors, screw in the standoffs, then hang the sheet and cap it. The install guide shows each step in 3D.
Should it be printed behind the acrylic or on top?
Behind, flat suits most photos and artwork: you see it through glossy clear acrylic. On top, raised suits oil-painting looks, with ink built up to 2 mm. Behind, see-through leaves out the white ink, so light shines through like stained glass. The request page shows your picture each way in 3D.
Can I send my own photo?
Yes: PNG, JPG, PDF or SVG, up to 25 MB each. On the request page you can move and zoom it on the sheet, add up to three lines of text, and see it in 3D. The bigger the photo, the sharper the print.
Can you make it look like stained glass?
Yes: ask for it in your request. For a see-through print we redraw your picture as stained glass, bright pieces of color with dark lead lines between them. The design is $15.
How do I look after it?
Dust it with a soft, dry microfiber cloth. For marks, dampen the cloth with a little water. Don't use glass cleaner, ammonia or alcohol: they cloud acrylic.
Where are you? Do you ship?
We're in Pasadena, Maryland, in Anne Arundel County. Pick it up at a time we arrange by email, or choose shipping in your request: we ship anywhere in the US by USPS, packed for the trip, and we add the shipping, at a live rate, to your order link.
Tell us about your print
See your price as you choose, then send your picture. We email your order link within 2 business days.